Made In USA

BUY FACTORY DIRECT

Credit Cards Accepted
326 Industrial Park Lane
Orleans, VT
326 Industrial Park Lane, Orleans, VT

FIRELITE® Transport Skid Unit FDHP-303-300

Darley or Davey Pump - Poly Water Tank / Hannay Reel & Rescue Area

Fire Fighting Slide in Skid Unit for Flatbed Trucks

Built to last and easy to use, our FIRELITE® Transport FDHP-303-300 skid unit is made for budget minded departments looking to add a brush truck to their fleet of apparatus. This capable, no nonsense wildland firefighting slip on skid unit will get the job done on road or off road. It is set up to be low profile and has a low center of gravity. The FDHP also has a rescue capability to carry a patient for off road rescue situations. The 300 gallon skid unit is special built to fit into most 8 foot long cargo boxes on full size pickup trucks or on a flatbed body. Tank is fully baffled according to NFPA standards. This unit comes complete with an electric rewind Hannay 4000 series reel and Scotty Through-the-Pump class A foam system with 5 gallon foam cell! The FIRELITE will surely fulfill your brush truck fire apparatus needs. Be sure to check out the options page for more customization of your FIRELITE FDHP skid unit!

-- BASE UNIT COMES STANDARD WITH THE FOLLOWING FEATURES --

  • All aluminum construction with bright aluminum diamond plate and aluminum tubing sub-frame
  • Hose bed storage section with tail gate for storing hard suction, forestry hose, nozzles etc
  • Features all stainless steel piping and 1/4 turn brass valves - limited lifetime warranty
  • Units comes complete with the Darley-Davey® Two Stage High Pressure Pump: Twin impeller, gas driven Honda engine pump powered by a manual recoil 6.5 HP (or upgrade to an electric start 9 or 13 HP) able to self-prime to 19'; Nitrile rubber seal & casing "O" rings; Low oil protection; One Year Pump Warranty; Two Year Engine Warranty
  • Comes with 2 gated 1-1/2" discharges 1 to side 1 to rear; 1 gated 1" pump to tank refill; 1 gated 1" to booster reel; 1 gated 1-1/2" auxiliary suction; 1 gated 1-1/2" tank to pump - all NST threads
  • 6.5 HP Davey Pump
    • 6.5 HP pump flows: 65 GPM @ 48 PSI, 50 GPM @ 81 PSI, 20 GPM @ 120 PSI
  • Available 9 HP or 13 HP Davey Pump Upgrade
    • 9 HP pump flows: 120 GPM @ 36 PSI, 95 GPM @ 83 PSI, 60 GPM @ 118 PSI, 20 GPM @ 144 PSI
    • 13 HP pump flows: 120 GPM @ 40 PSI, 95 GPM @ 108 PSI, 60 GPM @ 133 PSI, 20 GPM @ 146 PSI
  • Available Darley Pump Upgrade
    • 1.5 AGE 13 HX Darley pump flows: 120 GPM @ 60 PSI, 100 GPM @ 85 PSI, 23 GPM @ 225 PSI
  • 300 gallon poly water tank with integrated 5 gallon foam cell all baffled to NFPA specs - limited lifetime warranty
  • 5 gallon foam cell
  • Pre-connected F4000 Series Hannay Electric Reel® with 100' of 3/4" or 50' of 1" Boostlite Hose with wildland adjustable fog nozzle
  • Scotty Through-the-Pump Class A Foam System
  • Integrated water tank sight gauges; 1 for water, 1 for foam
  • 2- 48" x 1" stainless steel grab rails at rescue area for mounting a stokes basket or long board
  • 10- 24" long Velcro D Loop Straps Included
  • Adapter to refill water back packs in the field without starting pump
  • Reinforced skid plate bottom for fork lifts
  • Mercedes Draftlite Kit – includes Hydro-Wick Hand Primer installed on skid; 20’ of 1.5” suction hose; Foot Valve / Strainer

PRICES START AT $11,250.00 + SHIPPING
UNIT SHIPS FULLY ASSEMBLED

-- OPTIONS IN PLACE OF RESCUE AREA --

rear attack line tray, dead lay, on pickup truck skid unit

Add rear attack line tray (dead lay) to hold approximately 150’ of 1.5” line for the length of the unit. One long tool holder box length of skid unit with a full length door opening to the side of the unit (off passenger side) for easy access.

rear attack line tray, pre-connect, on pickup truck skid unit

Add a 4’ rear attack line tray (pre-connect) to hold booster line and one open toolbox holder to carry long tools with holder for long board on passenger side of skid unit.
*Optional high roller also shown

rear attack line tray, custom built, on pickup truck skid unit

Add custom built rear attack line tray (pre-connect) the length of the skid unit to hold approximately 150’ of 1.5” line. Second rear attack line tray (dead lay) length of the bed to hold approximately 150’ of 2.5” line.

rear attack line tray, pre-connect, on pickup truck skid unit

Add rear attack line tray (pre-connect) to hold approximately 150’ of 1.5” line for the length of the unit. One long tool holder box length of skid unit with a full length door opening to the side of the unit (off passenger side) for easy access.

Roller offs, on pickup truck skid unit

Add lower roller off driver’s side of truck, high roller off passenger side.

Other options include:

Increase length of hose to 100’ of 1” or 150’ of ¾” (requires larger reel at additional cost)

**Dead lay or pre-connect available for area adjacent to pump only.

 

“Thank you for your prompt delivery. Just a quick note to remark on the high quality workmanship of the FIRELITE®, which I took delivery of last Thursday. We put it to work immediately—fits like a glove in the truck, works like a charm, and looks spiffy. I’ll rest a lot better at night knowing we’ll have it on hand for prescribed burns. Thanks—and congratulations on an excellent product and a refreshing willingness to meet a customer’s needs.”

- Bill Moore, Ecological Woodlands Management, Wisconsin

Made In USA
BUY FACTORY DIRECT
Credit Cards Accepted