BUY FACTORY DIRECT
An affordable, all-inclusive quality skid - slip on unit is what makes our FIRELITE® Transport FDHP-303-200 series slip on unit a popular choice for budget minded fire departments, DNR, National Forest, military and commercial industrial plant applications. The FIRELITE can create a forestry truck out of a fire department owned pickup truck or flatbed in a short period of time, all for a great price! ALL FDHP-300 series brush truck skid units are delivered with many standard features such as an Electric rewind Hannay 4000 series reel with your choice of 100ft of ¾" or 50ft of 1" booster hose with wildland adjustable fog nozzle; A Scotty 4171 Through-the-Pump Foam System with integrated 5 gallon foam cell; Patient Rescue area; Hose storage area; Darley-Davey Pump with a Honda Commercial Motor available in 6.5, 9 or 13 HP size range ; all stainless steel plumbing with ¼ turn brass valves. You can further customize your FIRELITE Transport to fit your department’s needs! See our options section for more details.
When it comes to off road wildland firefighting, the FIRELITE FDHP-300 series forestry slip on skid units get the job done. They also are very effective for use as urban/suburban interface trucks, and work well in areas where dense, large crowds are present. Designed to be low profile, compact with a low center of gravity they can even carry a patient with a rescue capability that is included in each base unit. All units have the ability to draft up to 19 feet with an initial prime.
The FIRELITE® Transport FDHP-303-200 Series has a 200 gallon water tank fully baffled to NFPA standards. The 200 gallon brush truck skid unit is built special for 8 foot long pickup trucks or flatbed trucks.
PRICES START AT $9,700.00 + SHIPPING
UNIT SHIPS FULLY ASSEMBLED
Add rear attack line tray (dead lay) to hold approximately 150’ of 1.5” line for the length of the unit. One long tool holder box length of skid unit with a full length door opening to the side of the unit (off passenger side) for easy access.
Add a 4’ rear attack line tray (pre-connect) to hold booster line and one open toolbox holder to carry long tools with holder for long board on passenger side of skid unit.
*Optional high roller also shown
Add custom built rear attack line tray (pre-connect) the length of the skid unit to hold approximately 150’ of 1.5” line. Second rear attack line tray (dead lay) length of the bed to hold approximately 150’ of 2.5” line.
Add rear attack line tray (pre-connect) to hold approximately 150’ of 1.5” line for the length of the unit. One long tool holder box length of skid unit with a full length door opening to the side of the unit (off passenger side) for easy access.
Add lower roller off driver’s side of truck, high roller off passenger side.
Increase length of hose to 100’ of 1” or 150’ of ¾” (requires larger reel at additional cost)
**Dead lay or pre-connect available for area adjacent to pump only.
““Great product! Easy to install and ready to go out of the box! I definitely recommend to anyone who asks!”
© Copyright 2021 Kimtek Corporation | Sitemap | Tampa Web Design and Maintenance by Off the Page Creations