BUY FACTORY DIRECT
An affordable, all-inclusive quality skid - slip on unit is what makes our FIRELITE® Transport FDHP-301-125 series slip on unit is a popular choice for budget minded fire departments. The FIRELITE can create a brush truck out of a department owned pickup truck or flatbed in a short period of time for a great price! ALL FDHP-300 series brush truck skid units are delivered all set up with an Electric Hannay 4000 series reel with your choice of 100ft of ¾" or 50ft of 1" booster hose with wildland adjustable fog nozzle; A Scotty 4171 Around the pump Foam System with integrated 5 gallon foam cell; Patient Rescue area; Hose storage area; Darley-Davey Pump with Honda Commercial Motor; all stainless steel plumbing with ¼ turn brass valves. You can further customize your FIRELITE Transport to fit your department’s needs! See our options section for more details.
When it comes to off road wildland firefighting, the FDHP-300 series slip on skid units get the job done. Designed to be low profile, compact with a low center of gravity they can even carry a patient with a rescue capability that is included in each base unit. All units have the ability to draft up to 19 feet with an initial prime.
The FIRELITE® Transport FDHP-301-125 series slip on skid unit for wildland brush fires comes with a 125 gallon baffled water tank built to NFPA standards. The 125 gallon forestry unit is a special built compact skid unit made specifically for short bed 6.5 foot pickup trucks or flatbed trucks.
Add cross lay tray (dead lay) to hold approximately 150’ of 1.5” line for the length of the unit. One long tool holder box length of skid unit with a full length door opening to the side of the unit (off passenger side) for easy access.
Add a 4’ cross lay tray (pre-connect) to hold booster line and one open toolbox holder to carry long tools with holder for long board on passenger side of skid unit.
*Optional high roller also shown
Add custom built cross lay tray (pre-connect) the length of the skid unit to hold approximately 150’ of 1.5” line. Second cross lay tray (dead lay) length of the bed to hold approximately 150’ of 2.5” line.
Add cross lay tray (pre-connect) to hold approximately 150’ of 1.5” line for the length of the unit. One long tool holder box length of skid unit with a full length door opening to the side of the unit (off passenger side) for easy access.
Add lower roller off driver’s side of truck, high roller off passenger side.
**Dead lay or pre-connect available for area adjacent to pump only.
“Thank you for the seamless, hassle free, purchase experience. Wish every company we deal with was this hassle free. Thanks Again. We hope this unit will serve Decatur for many years to come.”
© Copyright 2017 Kimtek Corporation | Tampa Web Design and Maintenance by Off the Page Creations